Jumbo all-layer sampler, open inner tube, aluminium, total length 2500 mm

The Jumbo all-layer sampler ensures, through its open inner tube without separate chambers, the collection of a homogeneous composite sample that accurately reflects the overall composition of the material, even with heterogeneous materials. The open inner tube enables easy cleaning and the tip is removable. The sample is emptied easily through the open handle. The zone sampler can be autoclaved and flame-treated without difficulty, minimising the risk of sample contamination. The Jumbo zone sampler is used for sampling through all layers, particularly from coarse-grained bulk materials. The long sampling lances with a tube diameter of 50 mm and the particularly large chamber volume enable the collection of large sample quantities with large particle sizes. This zone sampler ensures representative sampling through all layers or zones of the material being sampled and is essential for accurate analysis and quality control in various industries. Since the sampling lances can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from various container types, silos or stockpiles. All-layer sampler for composite samples of large particles Extra-large chambers for extensive analyses Robust construction for lasting reliability Easy maintenance and cleaning to prevent cross-contamination Open inner tube for a homogeneous composite sample The Jumbo sampler is widely used in various industries where it is important to collect representative samples from different layers or areas of a material with a large particle size. This is particularly important in quality control and quality management in industry, especially in the food, pharmaceutical, chemical and building materials industries, to verify compliance with quality standards. In research and development, to analyse the composition, properties or contaminants of a material. In raw material extraction and processing, to assess the quality and composition of a material. A representative sample is essential for accurate test results. Turn the handle of the all-layer sampler clockwise; it is now closed and can be inserted into the powder/granulate. At the desired depth, turn the handle of the sampler anticlockwise; the sampling chambers open and fill with the sample. By turning the handle clockwise again, the sampler is closed and can be removed from the powder/granulate. Turn the all-layer sampler over and empty the all-layer sample through the open inner tube into a suitable collection vessel.