Novartos Multi stainless steel length 1000 mm without inserts

With the Novartos Multi double sampler, a double multi-point sample can be taken from several predefined sampling zones. For double sampling, four, seven or nine collection chambers are fitted with two sample inserts (accessories) each, depending on the length. Novartos pharmaceutical samplers can be used to take several unit-dose samples from one or more sampling points in a single sampling operation. Thanks to the intelligent design of these pharmaceutical samplers, multiple sampling does not require repeated insertion into the sample material, largely preventing segregation of the sample material. This is particularly important when taking very small quantities in the pharmaceutical industry. With the Novartos sampler, a large number of samples, including samples from the same point, can be taken quickly and easily, enabling representative retention samples. The immersion depth of the sampling lance can be easily read on the laser-engraved depth scale. The rounded tip prevents scratching the container. Two additional handles ensure safe insertion, fixing and turning in the material. The precisely fitting inserts prevent the material from mixing and enable easy disassembly for thorough cleaning. Thanks to the groove-free, electropolished surface of the pharmaceutical samplers and the high-quality workmanship, there are no gaps in which sample residues can settle, which is also a decisive advantage for easy cleaning. Powder sampler according to the FDA Unit-Dose Sampling Guideline For taking representative retention samples Precisely fitting, easily replaceable sample inserts Various volumes can be selected Two individual samples from several sampling points in a single sampling operation Double multi-point sample with easily replaceable sample inserts The Novartos pharmaceutical sampler is a highly specialized sampler mainly used in the pharmaceutical industry to meet the strict requirements of the FDA guidelines for Unit-Dose Sampling. However, its use is not limited to the pharmaceutical sector; it can also be used in the chemical industry, the food and beverage industry, biotechnology, and wherever the smallest quantities of powder must be sampled representatively. At “1”, set the sampler to the “CLOSE” position. The sampler is closed and can be inserted into the powder/granulate. Insert the sampler into the powder/granulate to the desired depth (the scale indicates the depth in cm). Set the sampler at “1” to the “OPEN” position. The sampler is now open and fills with sample. Set the sampler at “1” to the “CLOSE” position. The sampler is closed and the powder/granulate can be removed. If a second sample is to be taken, set the sampler at “2” to the “CLOSE” position. Set the sampler at “2” to the “OPEN” position. The sampler is open and fills with the second sample. Set the sampler at “2” to the “CLOSE” position. The sampler is closed and the powder/granulate can be removed. Open the sampler and empty the sample onto a suitably prepared surface or into suitable collection containers.