Jumbo all-layer sampler, open inner tube, aluminium, total length 1500 mm

The Jumbo all-layer sampler uses its open inner tube without separate chambers to obtain a homogeneous mixed sample that accurately reflects the overall composition of the material, even with heterogeneous materials. The open inner tube allows easy cleaning and the tip is removable. The sample is emptied easily through the open handle. The zone sampler can be autoclaved and flamed without difficulty, minimising the risk of sample contamination. The Jumbo zone sampler is used for sampling through all layers, particularly coarse-grained bulk materials. The long sampling lances with a tube diameter of 50 mm and the particularly large chamber volume enable the collection of large sample quantities with large particle sizes. This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries. As the sampling lances can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of containers, silos or stockpiles. All-layer sampler for mixed samples of large particles Extra-large chambers for extensive analyses Robust construction for lasting reliability Easy maintenance and cleaning to prevent cross-contamination Open inner tube for a homogeneous mixed sample The Jumbo sampler is widely used in various industries where it is important to take representative samples from different layers or areas of a material with a large particle size. This is particularly important for quality control and quality management in industry, especially in the food, pharmaceutical, chemical and building materials industries, to verify compliance with quality standards. In research and development, to analyse the composition, properties or contaminants of a material. In the extraction and processing of raw materials, to assess the quality and composition of a material. A representative sample is crucial for accurate test results. Turn the handle of the all-layer sampler clockwise; it is now closed and can be inserted into the powder/granulate. At the desired depth, turn the handle of the sampler anticlockwise; the sampling chambers open and fill with sample. By turning the handle clockwise again, the sampler is closed and can be removed from the powder/granulate. Turn the all-layer sampler over and empty the all-layer sample through the open inner tube into a suitable collection vessel.