PowderProof for granules 2–4 mm, 60 cm vertical lance, electric

PowderProof® with a vertical sampling lance is the ideal solution for sampling from large bulk containers with direct access from above. The sampling lance enables efficient and accurate sampling directly from open containers such as drums, barrels or Big Bags. The PowderProof® sampling lance is a field-tested, mobile yet electrically powered sampling solution specially designed for powders and granules. Large sample quantities can be obtained in a very short time. The robust drive unit, combined with an interchangeable sampling lance and conveying spiral, enables flexible sampling from a wide variety of bulk materials, whether from drums, BigBags or bags. With the PowderProof® sampler, both target-point and all-layer samples can be taken quickly and conveniently. This enables comprehensive quality control as early as incoming goods inspection. The lance tip is specially designed for good gliding and easy penetration into the material, even through narrow container openings. The sample material is guided directly through the sampling lance into the sample container, preventing contamination of the sample. Extensive accessories increase user-friendliness and safety during sampling. Mobile sampling lance with electric drive Electric drive reduces the effort required and enables convenient sampling at the push of a button Modular system with interchangeable sampling lances and conveying spirals for versatile use Extensive accessories for simple, safe and contamination-free sampling Vertical sampling, ideal for open containers The PowderProof® electric sampler is ideal for the food, pharmaceutical, chemical and agricultural industries, where contamination-free sampling of bulk materials in large quantities is essential. From incoming goods quality control to research and development, PowderProof® offers a reliable solution for sampling free-flowing powders and granules up to a diameter of 4 mm. Insert the sampling-lance adapter into the holder of the Bosch drive unit, insert the conveying spiral into the sampling lance, and screw the sampling lance onto the sampling-lance adapter using the union nut. Insert the sample bag into the bag-holding clamp and attach the bag-holding clamp to the sample outlet. Set the speed selector to 1 (low speed range) and press the on/off switch. Insert the sampling lance into the sample material; the sample material is conveyed directly through the lance into the sample bag. To end sampling, release the on/off switch. Pull the sampling lance out of the sample material.